rh, nh www.vishay.com vishay dale revision: 22-jun-12 1 document number: 30201 for technical questions, contact: ww2bresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 wirewound resistors, industrial power, aluminum housed, chassis mount features ? molded construction for total environmental protection ? complete welded construction ? meets applicable requirements of mil-prf-18546 ? available in non-inductive styles (type nh) with ayrton-perry winding for lowest reactive components ? mounts on chassis to utilize heat-sink effect ? excellent stability in operation (< 1 % change in resistance) ? mil-prf-18546 qualified, type re resistors can be found at: www.vishay.com/doc?30282 ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note * lead (pb)-containing terminations are no t rohs-compliant. ex emptions may apply. note ? rh005 and nh005 printed with 5 w power rati ng. rh010 and nh010 printed with 10 w power rating. new construc tion allows these resistors to be rated at high er wattage but will only be printed with the higher wa ttage upon customer request standard electrical specifications global model historical model power rating p 25 c w resistance range ? resistance range ? resistance range ? resistance range ? weight (typical) g 0.05 %, 0.1 % 0.25 % 0.5 % 1 %, 3 %, 5 % rh005 rh-5 7.5 0.5 to 6.75k 0.1 to 8.6k 0.05 to 8.6k 0.02 to 24.5k 3 nh005 nh-5 7.5 0.5 to 2.32k 0.1 to 3.27k 0.05 to 3.27k 0.05 to 12.75k 3 rh010 rh-10 12.5 0.5 to 12.7k 0.1 to 16.69k 0.05 to 16.69k 0.01 to 47.1k 5 nh010 nh-10 12.5 0.5 to 4.45k 0.1 to 5.54k 0.05 to 5.54k 0.05 to 23.5k 5 rh025 rh-25 25 0.5 to 25.7k 0.1 to 32.99k 0.05 to 32.99k 0.01 to 95.2k 12 nh025 nh-25 25 0.5 to 9.09k 0.1 to 12.8k 0.05 to 12.8k 0.05 to 47.6k 12 rh050 rh-50 50 0.5 to 73.4k 0.1 to 96k 0.05 to 96k 0.01 to 273k 28 nh050 nh-50 50 0.5 to 26k 0.1 to 36.7k 0.05 to 36.7k 0.05 to 136k 28 rh100 rh-100 100 0.5 to 90k 0.1 to 90k 0.05 to 90k 0.05 to 90k 353 nh100 nh-100 100 0.5 to 37.5k 0.1 to 37.5k 0.05 to 37.5k 0.05 to 37.5k 353 rh250 rh-250 250 0.5 to 116k 0.1 to 116k 0.05 to 116k 0.05 to 116k 637 nh250 nh-250 250 0.5 to 48.5k 0.1 to 48.5k 0.05 to 48.5k 0.05 to 48.5k 637 technical specifications parameter unit rh resistor characteristics temperature coefficient ppm/c 20 for 10 ? and above; 50 for 1 ? to 9.9 ? , 100 for 0.1 ? to 0.99 ? maximum working voltage v ( p x r ) 1/2 insulation resistance ? 10 000 m ? minimum dry, 1000 m ? minimum after moisture test solderability - meets requirements of ansi j-std-002 operating temperature range c - 55 to + 250 global part number information global part numbering example: rh0054r125fc02 global model resistance value tolerance code packaging special rh005 (see standard electrical specifications global model column for options) r = decimal k = thousand 15r00 = 15 ? 10k00 = 10 k ? a = 0.05 % b = 0.1 % c = 0.25 % d = 0.5 % f = 1.0 % h = 3.0 % j = 5.0 % e02 = lead (pb)-free, card pack (rh005 - rh050) e01 = lead (pb)-free, skin pack (rh100 and rh250) (dash number) (up to 3 digits) from 1 to 999 as applicable c02 = tin/lead, card pack (rh005 - rh050) j01 = tin/lead, skin pack (rh100 and rh250) historical part number ing example: rh-5 4.125 ? 1 % c02 rh-5 4.125 ? 1 % c02 historical model resistance value tolerance code packaging rh0054r12 5fc02
rh, nh www.vishay.com vishay dale revision: 22-jun-12 2 document number: 30201 for technical questions, contact: ww2bresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in inches [millimeters] dimensions in inches [millimeters] global model dimensions in inches [millimeters] abcdefghjklmnp rh005 nh005 0.444 0.005 [11.28 0.127] 0.490 0.005 [12.45 0.127] 0.600 0.030 [15.24 0.787] 1.125 0.062 [28.58 1.57] 0.334 0.015 [8.48 0.381] 0.646 0.015 [16.41 0.381] 0.320 0.015 [8.13 0.381] 0.065 0.010 [1.65 0.254] 0.133 0.010 [3.38 0.254] 0.078 0.010 [1.98 0.254] 0.093 0.005 [2.36 0.127] 0.078 0.015 [1.98 0.381] 0.050 0.005 [1.27 0.127] 0.266 0.062 [6.76 1.57] rh010 nh010 0.562 0.005 [14.27 0.127] 0.625 0.005 [15.88 0.127] 0.750 0.031 [19.05 0.787] 1.375 0.062 [34.93 1.57] 0.420 0.015 [10.67 0.381] 0.800 0.015 [20.32 0.381] 0.390 0.015 [9.91 0.381] 0.075 0.010 [1.91 0.254] 0.165 0.010 [4.19 0.254] 0.093 0.010 [2.36 0.254] 0.094 0.005 [2.39 0.127] 0.102 0.015 [2.59 0.381] 0.085 0.005 [2.16 0.127] 0.312 0.062 [7.92 1.57] rh025 nh025 0.719 0.005 [18.26 0.127] 0.781 0.005 [19.84 0.127] 1.062 0.031 [26.97 0.787] 1.938 0.062 [49.23 1.57] 0.550 0.015 [13.97 0.381] 1.080 0.015 [27.43 0.381] 0.546 0.015 [13.87 0.381] 0.075 0.010 [1.91 0.254] 0.231 0.010 [5.87 0.254] 0.172 0.010 [4.37 0.254] 0.125 0.005 [3.18 0.127] 0.115 0.015 [2.92 0.381] 0.085 0.005 [2.16 0.127] 0.438 0.062 [11.13 1.57] rh050 nh050 1.562 0.005 [39.67 0.127] 0.844 0.005 [21.44 0.127] 1.968 0.031 [49.99 0.787] 2.781 0.062 [70.64 1.57] 0.630 0.015 [16.00 0.381] 1.140 0.015 [28.96 0.381] 0.610 0.015 [15.49 0.381] 0.088 0.010 [2.24 0.254] 0.260 0.010 [6.60 0.254] 0.196 0.010 [4.98 0.254] 0.125 0.005 [3.18 0.127] 0.107 0.015 [2.72 0.381] 0.085 0.005 [2.16 0.127] 0.438 0.062 [11.13 1.57] rh005, 010, 025, 050 nh005, 010, 025, 050 p d c a l m n j f e h g k b rh250, nh250 rh100, nh100 2.25 0.010 [57.15 0.254] 0.989 0.0 3 1 [25.12 0.787] 2.812 0.0 3 1 [71.42 0.787] 3 .50 0.0 3 1 [88.90 0.787] nickel plate d b rass nut stainless steel stu d 1.125 0.0 3 1 [28.58 0.787] 0.188 0.010 [4.78 0.254] dia. typ. 12 - 24 unc-2a th d . typ. 2.75 0.010 [69.85 0.254] 0. 3 75 0.0 3 1 [9.52 0.787] 5.478 0.09 3 [1 3 9.14 2. 3 6] 1.75 0.0 3 1 [44.45 0.787] 2.188 0.0 3 1 [55.58 0.787] 2.125 0.0 3 1 [5 3 .98 0.787] 0.250 0.0 3 1 [6. 3 5 0.787] typ. 4.50 0.0 3 1 [114. 3 0 0.787] 2.50 0.010 [6 3 .50 0.254] 7.0 0.09 3 [177.80 2. 3 6] 0.875 0.010 [22.2 3 0.254] 3 .0 0.010 [76.20 0.254] 3 .875 0.010 [98.42 0.254] 0.770 0.015 [19.56 0. 3 81] 0.188 0.0 3 1 [4.78 0.787] typ. 1.812 0.0 3 1 [46.02 0.787] 0. 3 12 0.0 3 1 [7.92 0.787] 1.25 0.062 [ 3 1.75 1.575] 1.25 0.062 [ 3 1.75 1.575] 1/4 - 20 unc-2a th d . typ. 0.955 0.015 [24.26 0. 3 81] 3 .0 0.0 3 1 [76.20 0.787] nickel plate d b rass nut stainless steel stu d 0.188 0.010 [4.78 0.254] dia. typ.
rh, nh www.vishay.com vishay dale revision: 22-jun-12 3 document number: 30201 for technical questions, contact: ww2bresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 power rating vishay rh resistor wattage ratings are based on mounting to the following heat sink: rh005 and rh010: 4" x 6" x 2" x 0.040" thick aluminum chassis (129 sq. in. surface area) rh025: 5" x 7" x 2" x 0.040" thick aluminum chassis (167 sq. in. surface area) rh050: 12" x 12" x 0.059" thick alum inum panel (291 sq. in. surface area) rh100 and rh250: 12" x 12" x 0.125" thick aluminum panel (294 sq. in. surface area) ambient temperature derating derating is required for ambient temperat ures above 25 c, see the following graph. curves a , b , c apply to operation of unmounted resistors. curve d applies to all types when mo unted to specified heat sink. a = rh005 and rh010 size resistor, unmounted b = rh025 size resistor, unmounted c = rh050, rh100 and rh250 size resistor, unmounted d = all types mounted to recommended aluminum heat sink reduced heat sink derating derating is also required when reco mmended heat sink area is reduced. a = rh005 and rh010 size resistor b = rh025 size resistor c = rh050, rh100 and rh250 size resistor free air power rating global model rh005 nh005 rh010 nh010 rh025 nh025 rh050 nh050 rh100 nh100 rh250 nh250 w at 25 c 4.5 7.5 12.5 20 40 100 rated power in % ambient temperature in c 25 120 a c d b 0 20 40 60 80 100 - 55 - 50 0 50 150 250 0 100 80 60 40 20 0 100 90 80 70 60 50 40 30 20 10 % of recommended heat s ink area rated power in % c b a
rh, nh www.vishay.com vishay dale revision: 22-jun-12 4 document number: 30201 for technical questions, contact: ww2bresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 material specifications element: copper-nickel alloy or nickel-chrome alloy, depending on resistance value core: ceramic, steatite or alumina, depending on physical size encapsulant: silicone molded construction housing: aluminum with hard anodic coating end caps: stainless steel standard terminals: for rh005 through rh050 size terminal finish - tin/lead is 60/40 sn/pb w/nickel underplate and lead (pb)-free is ni/pd/au, finish is on copper clad steel core terminal. for rh100 and rh250 terminals are threaded stainless steel. part marking: dale, model, wattage, value, tolerance, date code nh non-inductive models of equivalent physical and electrical specifications are available with non-inductive (ayrton-perry) winding. they are identified by substituting the letter n for r in the model number (nh005, for example). special modifications a number of special modifications to the aluminum housed resistor style are available upon request. special modifications include: ? terminal configurations and materials ? resistance values and tolerances ? low resistance temperature coefficient (rtc) ? housing configuration ? threaded mounting holes ? preconditioning and other additional testing applicable mil specifications vishay rh and nh resistors are listed as qualified on the mil-prf-18546 qpl. mil-prf-18546 qualified, type re resistors can be found at: www.vishay.com/doc?30282 performance test conditions of test test limits thermal shock rated power applied until thermally stable , then a minimum of 15 min at - 55 c (0.5 % + 0.05 ? ) ? r short time overload 5 x rated power for 5 s (0.5 % + 0.05 ? ) ? r dielectric withstanding voltage 1000 v rms for rh005, rh010 and rh025; 2000 vrms for rh050; 4500 v rms for rh100 and rh250; duration 1 min (0.2 % + 0.05 ? ) ? r temperature 250 c for 2 h (0.5 % + 0.05 ? ) ? r moisture resistance mil-std-202 method 1 06, 7b not applicable (1.0 % + 0.05 ? ) ? r shock, specified pulse mil -std-202 method 213, 100 g s for 6 ms, 10 shocks (0.2 % + 0.05 ? ) ? r vibration, high frequency frequ ency varied 10 hz to 2000 hz, 20 g peak, 2 directions 6 h each (0.2 % + 0.05 ? ) ? r load life 1000 h at rated power, + 25 c, 1.5 h on, 0.5 h off (1.0 % + 0.05 ? ) ? r terminal strength 30 s, 5 pound pull test for rh005 and rh 010, 10 pound pull test for other sizes; torque test - 24 pound inch for rh100 and 32 pound inch for rh250 (0.2 % + 0.05 ? ) ? r
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
